Why should you remove the keys from the forklift after you have finished using it?

Depending on your site requirements and to prevent unauthorised use of the forklift the key should be removed and returned to a secure location. A typical site where keys are left in forklifts are emergency service building and airports where strict security restricts access to outsiders and untrained personnel.

Do you leave the keys for the forklift?

Never leave an operating forklift unattended.

In fact, leaving keys in an unattended forklift (or, thus, leaving on the ignition of this vehicle) is illegal, and has dire consequences as a safety hazard, even without the actual occurrence of an accident. Know and never exceed the lifting capacity of the forklift.

Which of the following are safe work practices when using forklifts?

Stay Safe While Using A Forklift

Ensure both forks are as far under the load as possible before lifting. Drive with the load as low as safely possible. Pay attention to posted speed limits and warning signs. Always look in the direction you’re traveling; if a load blocks the view ahead, travel in reverse.

IT IS IMPORTANT:  What engine is in a Yale forklift?

What should you do every time you park a forklift?

Set the parking brake every time you park the forklift. Make sure you test the parking brake at the beginning of your shift when you do the forklift inspection. While in the driver’s seat, set the parking brake and then put the gear into forward or reverse and step on the accelerator slightly.

What should not be done when operating a forklift?

Avoid standing or walking under a load, lifting mechanism, or forklift attachment, as loads can fall off on anyone positioned below it. Keep hands and feet clear away from the forklift mast, as a moving mast can cause serious injury.

When leaving a forklift unattended How should the forks be?

In addition, an unattended powered industrial truck is mentioned in rule 4081.2174, Parking (1) When leaving a powered industrial truck unattended, an operator shall fully lower the forks flat to the floor, neutralize the controls, set the brakes and shut the power off.

What is the first thing you should do before setting off on a route with your forklift?

Make sure the truck is placed squarely in front of the load. Make sure the forks are at the correct height for lifting the load. Set the direction control to neutral. Never raise or lower the forks unless the forklift is stopped and the brake is set.

Why is forklift safety important?

It keeps workers safe

There are higher chances of sudden accidents while operating forklifts, particularly if a person does not have proper safety training. Proper forklift safety training is an ideal means to minimize fatalities.

IT IS IMPORTANT:  Frequent question: Can a 16 year old operate a forklift?

What is the most important safety device on a forklift?

5 most important safety devices on a forklift

  1. Brakes. Brakes are the absolute most important safety feature on any motorized vehicle. …
  2. Seatbelts. …
  3. Overhead guards. …
  4. Lights. …
  5. Horn.

What are the responsibilities of a forklift operator?

Forklift Operator job description

  • Unloading materials and merchandise from incoming vehicles and stacking them to assigned places.
  • Locating and moving stock of products to pallets or crates for storage or shipment.
  • Identifying damages and report shortages or quality deficiencies.