What is the front of a forklift called?

The carriage is a platform located in front of the forklift mast that is used to mount objects to be controlled by the mast. This includes the forks of the forklift, the load backrest and other features of a forklift truck that come in direct contact with the loads.

What are the component of a forklift?

Operator Cab

The cabs generally include the steering wheel, brake and acceleration pedals, levers to control the forks and the mast, and a dashboard with gauges. In some forklifts, the cab will have a seat for the operator while others are designed for the operator to stand.

What is a carriage plate on a forklift?

• Designed to allow an existing truck carriage class to be converted from one carriage class to another, allowing different attachments to be used on the same truck.

What is the Cage called on a forklift?

A forklift work platform is a unit or cage that is integrated (built in), or designed to be supported on the forks of a lift truck. Work platforms that are used to elevate (lift or raise) workers must provide appropriate support and safety measures.

IT IS IMPORTANT:  What is side shift on a forklift?

Are forklifts front wheel drive?

Forklifts are front wheel drive. The front wheels drive while the rear wheels steer.

What is another name for a forklift?

A forklift (also called lift truck, jitney, fork truck, fork hoist, and forklift truck) is a powered industrial truck used to lift and move materials over short distances.

What is the function of the front wheels on a forklift?

In a car or truck, the front wheels steer the vehicle. However, a forklift has the steering wheels in the rear end of the forklift so it can swing in a circle around the front wheels that support most of the load. This allows the forklift to rotate the load into the correct position.

What are ITA forks?

Clip Mount Forklift Forks—also known as ITA Forks—are made of a premium steel blend in addition to being fully heat-treated. … These forks come in a graphite grey finish and can be easily secured directly to a frame or carriage via their ITA clips. We can also customize these forks to work with fork positioner systems.

What is a pantograph on a forklift?

Axon Forklift: Pantograph

Pantograph is put into operation whenever Telescopic Forks or Reach Forks can be used. The knife forks of this attachment can pick up loads with very little bottom clearance and stacked double deep for transportation. Pantograph is one of forklift parts.

Are Man baskets allowed on a forklift?

Additions such as fork extension and man basket or any modification to the forklift can affect the load capacity and safe operation of the truck. The forklift manufacturer prohibits such addition or alteration unless they allow it so.

IT IS IMPORTANT:  How heavy is a scissor lift?

What are the 3 levers on a forklift?

Hydraulic Lift Knobs: Forklift has three basic controls knobs. One that lifts the forks up or down, the second one tilts the forks/blades down or up to secure the load, and the third to move the load side to side.

What is forklift tail swing?

Unlike automobiles, forklifts steer from the rear. This design creates a forklift tail swing during turns, moving the rear of the forklift to the opposite side of the turn. … For pedestrians, the stakes are higher if they are caught between the forklift tail swing and another object.

Are forklifts RWD?

Forklifts use rear-wheel steering because the front wheels bear the load of whatever is being carried. … Operators must also account for rear-end swing when turning, as the large and heavy counterweight swings out behind the forklift.

What is forklift driver?

Forklift operators, sometimes referred to as forklift drivers, are logistical workers who operate industrial vehicles in warehouses and factories, at railroad freight centers and ports, and on construction sites. They need to have valid driver’s licenses, and in many states, forklift or heavy machinery certification.