Your question: How much horsepower does a disc mower need?

A new 9 ft cut disc mower/conditioner with rubber rolls from NH calls for 65 HP. But if you move up to the 10 foot cut NH, minimum HP is 80. Keep in mind that these ratings are for ideal conditions (flat land, uniform crop, etc.) and running at pretty high ground speeds.

How much horsepower does it take to run a disc mower?

Power requirement of disc mowers are around 3 to 7 hp per foot of cutting width which can double when the knife blades are worn. Typical power requirement for an 8 disc mower with a working width of 10 ft. is about 60 hp.

How much horsepower does a Discbine need?

The 540-rpm drive and low horsepower requirement mean you can mow and condition your crop for fast drying with as little as 65 PTO horsepower. The H7220 features a chevron-design intermeshing rubber-roll conditioning system, while the H7320 comes with a LeaningEdge™ flail conditioner.

How much horsepower does it take to run a hay mower?

Most standard square balers on the market require 35 horsepower at your tractor’s PTO, and a minimum tractor weight of around 3000 pounds. That means that they cannot be run with today’s compact tractors.

IT IS IMPORTANT:  What is rainwater harvesting question answer?

Which is better drum or disc mower?

Drum mowers are easily the most rugged of the hay mower types. … A drum mower can be run at even higher speeds than a disc mower, and double the speed of a sickle bar. Low power consumption.

How much does a disc mower weigh?


Number of disks Eight
Number of knives 16
Width of cut 3.11 m 10.17 ft
Transport width
Weight 712 kg 1570 lb

How does a disc mower work?

The discs are driven either by a shaft or gears that are inside the cutter bar. Like with a sickle bar, the cutter bar essentially slides along the ground, which is what controls the cutting height. The advantages of a disc mower are: … Disc mowers handle thick and lodged hay with ease.

What does a Discbine do?

A conditioner (or hay conditioner) is a farm implement that crimps and crushes newly cut hay to promote faster and more even drying. … The names Haybine and Discbine are brand names of mower-conditioners, although some farmers use these names somewhat generically.

How much hay will an acre grow?

Even an average rule of thumb can vary widely by region, soil, and type of hay. For us here in the Midwest, a mixed grass/legume hay can yield anywhere from one to five tons per acre for a full season.

How much HP does a round baler need?

The MegaWide models that require a minimum of 125 PTO HP need to be paired with a more heavy duty tractor like a 4WD or Row Crop tractor.

John Deere Baler Horsepower Requirements.

IT IS IMPORTANT:  How long do Craftsman lawn mowers last?
Model PTO HP (Minimum)
450E 55 hp
450M / 450M Silage 55 hp
550M / 550M Silage 55 hp
460M / 460M Silage 65 hp

How much HP does it take to run a large square baler?

My vote, at least 160 hp fwa with some weight on the frront and rear to make it safe. AS a side note, if your going to run it yourself maybe you can get away with much less.

What is the difference between a flail mower and a rotary mower?

Brush hogs are rotary mowers. This means that cutting is performed by horizontally spinning blades. … A flail mower cuts with “ flails”, y- or t-shaped blades, attached to a long shaft. This shaft, powered through PTO drive, runs parallel to the ground, and as it rotates these blades shred biomass.

What is a sickle mower?

Mounted on the side of a tractor, sickle bar mowers are designed to tilt upward to mow along steep banks while the tractor creeps along on level ground. The walk-behind models propel themselves up an incline and the big knobby tires and wide blade keeps them from tipping over on a hillside.

Are reel mowers better than rotary?

Reel mowers are preferred for lower mowing heights (under an inch) whereas rotary mowers perform better at higher mowing heights. Reel mowers are more effective when the grass is not too long, wet, or undulating. Reel mowers also have a hard time chopping up twigs and going over rocks.