You asked: How do I identify my Ford 8N tractor?

The best way to identify a tractor is by the serial number. Serial numbers on the 9N-2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter. The hundred series and “01” series tractor serial number location is on the flat area above and behind the starter.

How do I know if I have a Ford 8N?

The best way to differentiate an 8N from a 9N is by using serial numbers. Search your engine for the engraved serial number. Look at the upper part of your engine block, just behind the oil filter. Ford 8N models start with an “8N”, while 9N starts with “9N.”

How do I identify my Ford tractor?

You’ll find it on the right side of your tractor, imprinted on the flywheel housing. Look just behind the starter and above the lug nut in the flywheel housing. You should find a series of three codes. The first is the tractor’s model number.

IT IS IMPORTANT:  You asked: What do you do when you flood a lawn mower?

How do you tell what year a tractor is?

First and foremost is the tractor serial number, which is stamped into an aluminum plate located on the right side of your tractor, on the steering gear housing. Use the tractor serial number table to look up the year.

How can you tell the difference between an 8N and 9N Ford tractor?

You can also tell between an 8n and 9n Ford tractors by the positioning of the brake pedal. The 9n has the two brake pedals on opposite sides, so you have a brake pedal close to your right foot and another close to your left foot. On the other hand, the 8n has both brake pedals on the right side.

How do you read a Ford 8N serial number?

The best way to identify a tractor is by the serial number. Serial numbers on the 9N-2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter. The hundred series and “01” series tractor serial number location is on the flat area above and behind the starter.

What year was Ford 8N made?

Official production of the 8N tractor began in July 1947. Equipped with a 4-speed transmission, this model was destined to become the top-selling individual tractor of all time in North America.

How do you read a Ford tractor serial number?

You should see five numbers and digits. The first digit will tell you what year the tractor was built in. Ford tractors have a special system to designate the year of production. The number 5 will refer to the year 1965, the number 6 will refer to the year 1966 and so on.

IT IS IMPORTANT:  How much did a tractor cost in 1920?

What horsepower is a Ford 8N tractor?

Ford 8N

Ford 8N Power
Drawbar (claimed): 23.16 hp 17.3 kW
PTO (claimed): 27.32 hp 20.4 kW
Drawbar (tested): 21.95 hp 16.4 kW
PTO (tested): 23.24 hp 17.3 kW

How can you tell what year a serial number is?

The 1st three numbers of your serial number will always provide your manufacture date. The 1st number is the YEAR of manufacture; the 2nd & 3rd numbers indicate the MONTH of manufacture.

How do I look up a serial number?

Android tablet Settings feature

  1. Option one: Open Settings > About Tablet > Status > Serial Number.
  2. Option two: For most products, the serial number can be viewed at the bottom of the device back cover.

What color is a Ford 8N tractor?

Pre and Post 1958. The 8N “Gray” has been described as “green/gray” or even as “tan”. The color that we use matches the original product.

What does 8N mean on a tractor?

The 8N introduced position control, which is a small up/down handle under the seat on the right side–this was an improvement to the hydraulic system. Both brake pedals are on the same side – 9N and 2N tractors were split.

What size engine does a Ford 8N tractor have?

Engine and Performance

The 8N features a four-cylinder, eight-valve engine with 120 cubic inches (ci) of displacement. The engine features 3.188 inches of bore and 3.75 inches of stroke with a 6-to-1 or 6.7-to-1 compression ratio, depending on the year. The 8N features a 23.22 belt horsepower with a 27.32 maximum.