What is a Category 2 tractor?

Once you cross over 50 horsepower and you move up into utility tractors, you’re gonna move into Category 2. This is typically used on tractors between about 50 and 150 horsepower or so, although there are always gonna be some exceptions in those ranges.

What is a Category 3 tractor?

What are the 3-point hitch categories?

Category Tractor Power Lower hitch spacing
1 20-45 HP 28 in (710 mm)
2 40-100 HP 34 in (860 mm)
3 80-225 HP 40 in (1,000 mm)
4 More than 180 HP 48 in (1,200 mm)

What is a Category 1 tractor hitch?

Category 1

You’ll widely find these on tractors offering between 20 and 50 horsepower. The top link pin measures 3/4 inch in diameter, while the two lift arm pins are slightly thicker at 7/8 inch. The spacing between the lift arms is approximately 26 inches. You may also find references to “limited” Category 1 hitches.

Can you use a CAT 1 implement on a cat 2 tractor?

If you wanted to stay with your current cat 1 implements, probably should have bought a cat 1 tractor. As 56FordGuy said, you have to be careful using cat 1 implements behind a cat 2 tractor. They typically just are not built to take the stresses that a cat 2 tractor can put on them.

IT IS IMPORTANT:  How much hp tractor do I need?

What is considered a Category 1 tractor?

Category 1 is very, very common and typically you’re gonna see Category 1 on tractors under about 50 horsepower. The back of this B-series tractor here is a Category 1 hitch. … This is typically used on tractors between about 50 and 150 horsepower or so, although there are always gonna be some exceptions in those ranges.

What is a Category 1 and 2 tractor?

Category 1 Hitch For tractors with 20 to 50 horsepower. Category 2 Hitch For tractors with 50 to 90 horsepower.

What is a Category 3 hitch?

Category 3 hitches are found on tractors of 80 hp to 225 hp and have top link pins that measure 1-1/4″ and lift arm pins of 1=7/16″. The spacing of the lift arms is about 38″. … Category 3 tractors are beyond what most homesteaders will have, but if you do be aware of the the difference between the cat.

What is a tractor 3 point hitch?

The three-point hitch (British English: three-point linkage) is a widely used type of hitch for attaching ploughs and other implements to an agricultural or industrial tractor. The three points resemble either a triangle, or the letter A. … The tractor carries some or all of the weight of the implement.

What size is a Category 1 3-point hitch?

Three-point hitch specifications

Category Hitch pin size power
1 19 mm (3/4″) 15-35 kW (20-45 hp)
2 25.5 mm (1″) 30-75 kW (40-100 hp)
3 31.75 mm (1 1/4″) 60-168 kW (80-225 hp)
4 45mm (1 3/4″) 135-300 kW (180-400 hp)

What category 3-point hitch is on a Kubota BX?

The BX-Series feature a sturdy, hydraulically controlled Category I 3-point hitch that allows you to attach a wide variety of rear implements.

IT IS IMPORTANT:  You asked: Can I put ATV tires on my mower?