What is the difference between Category 1 and Category 2 hitch?
Category 1 Hitch For tractors with 20 to 50 horsepower. Category 2 Hitch For tractors with 50 to 90 horsepower. Long days can seem even longer when you aren’t comfortable.
What is a Category 3 tractor hitch?
Category 3 hitches are found on tractors of 80 hp to 225 hp and have top link pins that measure 1-1/4″ and lift arm pins of 1=7/16″. The spacing of the lift arms is about 38″. … Category 3 tractors are beyond what most homesteaders will have, but if you do be aware of the the difference between the cat.
What is considered a Category 1 tractor?
Category 1 is very, very common and typically you’re gonna see Category 1 on tractors under about 50 horsepower. … This is typically used on tractors between about 50 and 150 horsepower or so, although there are always gonna be some exceptions in those ranges.
What are tractor categories?
What are the 3-point hitch categories?
|Category||Tractor Power||Lower hitch spacing|
|1||20-45 HP||28 in (710 mm)|
|2||40-100 HP||34 in (860 mm)|
|3||80-225 HP||40 in (1,000 mm)|
|4||More than 180 HP||48 in (1,200 mm)|
What is a tractor 3 point hitch used for?
The primary benefit of the three-point hitch system is to transfer the weight and resistance of an implement to the drive wheels of the tractor. This gives the tractor more usable traction than it would otherwise have, given the same power, weight, and fuel consumption.
What is a Category 1 quick hitch?
This 3-point quick hitch is used for the easy attachment and release of 3-point implements and equipment. The lift arm spacing on this category 1 tractor hitch is 27-1/4 in. The distance between the lift arms and the top link is adjustable and ranges from a minimum of 15 in. to a maximum of 18-1/4 in.
What is a Category 2 hitch?
A Category 2 hitch increases the top link pin diameter to 1 inch and the lift arm pins to 1 1/8 inch. The spacing between the arms increases to approximately 32 inches.
Can you use a CAT 1 implement on a cat 2 tractor?
If you wanted to stay with your current cat 1 implements, probably should have bought a cat 1 tractor. As 56FordGuy said, you have to be careful using cat 1 implements behind a cat 2 tractor. They typically just are not built to take the stresses that a cat 2 tractor can put on them.
Do all tractors have a 3 point hitch?
Not all tractor drawn farm implements require the use of a three-point hitch, but many of them do. … A diagram is included which shows all of the parts of a three-point hitch. It shows a drawbar fastened between the two arms, which is not commonly used, but can be.
What size is Category 1 3 point hitch?
Three-point hitch specifications
|Category||Hitch pin size||power|
|1||19 mm (3/4″)||15-35 kW (20-45 hp)|
|2||25.5 mm (1″)||30-75 kW (40-100 hp)|
|3||31.75 mm (1 1/4″)||60-168 kW (80-225 hp)|
|4||45mm (1 3/4″)||135-300 kW (180-400 hp)|
What is a quick hitch for a tractor?
This tractor hitch lets you quickly and easily attach and release three-point implements without leaving your tractor seat. Designed for tractors up to 45 HP, this trailer hitch features four position draw pin adjustments.
What category 3 point hitch is on a Kubota BX?
The BX-Series feature a sturdy, hydraulically controlled Category I 3-point hitch that allows you to attach a wide variety of rear implements.