What can I fill my tractor tires with for Weight?

You must add inner tubes to the tractor’s wheels & tires, otherwise the steel wheels will corrode away quickly. A 31 percent mixture of calcium chloride is freeze resistant down to minus 58 F. Calcium chloride weighs 11.3 pounds per gallon making it a good option to get the most weight on your tractor.

What can you fill tractor tires with?

Some common materials include water, calcium chloride, antifreeze, windshield washer fluid, beet juice and polyurethane foam.

What kind of liquid do you put in tractor tires?

A 50/50 antifreeze/water mixture will remain liquid at much colder temperatures than straight water—down to approximately -35°F. A higher 70/30 mixture of antifreeze/water can perform even better in colder temperatures, but don’t assume straight antifreeze will serve best of all.

How much weight does beet juice Add to tractor tires?

How much weight will Rim Guard Beet Juice add to my equipment? Beet juice tire ballast weighs 10.7 to 11.0 lbs. per gallon. Usually, tires are filled to the 12:00 rim position or about 75% full.

IT IS IMPORTANT:  You asked: How do I find out what year my Toro lawn mower is?

How much does liquid tire ballast weight?

Water is not a typical tire fill. Methonal Alchol is a more common fill and weights 6.5lbs per gallon. Other fills like Calcium, Beat Juice, etc can be varying weights.

Liquid Tire Ballast Chart.

TIRE SIZE GALLONS OF WATER ADDED WEIGHT (lbs.) PER TIRE
18.4-34 100 834
18.4-38 110 917
19.5L-24 73 609
20.8-34 128 1068

What is beet juice for tractor tires?

Beet Juice Tire Ballast is an American-made product that is formulated using a byproduct of the sugar beet manufacturing process, which offers the heaviest non-corrosive liquid ballast on the market today.

How much weight does filling tractor tires add?

Different sized tires will need different amounts of the liquid ballast. For example, an 18.4-38 rear tractor tire will need 110 gallons of the liquid and this liquid will add 1,177 pounds to the tire.

Can you put antifreeze in tractor tires?

Fill your tires with diluted antifreeze in cold weather.

Mix water with antifreeze in a 50/50 ratio to prevent your ballast from weighing down your tractor when temperatures drop. … Antifreeze can keep liquid ballast from solidifying in temperatures down to −40 °F (−40 °C).

Are tractor tires filled with fluid?

There are three main reasons to fill tractor tires with fluids, like water. … All these factors help prolong the life of the tire and increase, overall, productivity. There are many other fluids and compounds, other than water, that are used to fill tractor tires.

What do tractor tires weigh?

The average large tractor tire is 400 to 600 pounds each. When you take those numbers and add up all four tires, your tractor tires alone may weigh 800 to 2,400 pounds!

IT IS IMPORTANT:  Why are tractor fronts narrow?

What is ballast weight on tractor?

In terms of compact tractors, ballast is weight that is added to the front or more commonly to rear of the tractor to optimize the load distribution. … Depending on the task and implements you are using, it may be appropriate to place ballast on either the front, or back of your tractor.

How much fluid do you put in tractor tires?

IMPORTANT: A maximum liquid fill of 40 percent is recommended in rear tires for better tractor performance instead of the previous recommendation of 75 percent fill. Fill tube-type or tubeless tires up to valve level (40 percent full) with valve (A) shown above, in the 4 o’clock position.

How much weight can you put in a tractor?

Some manufacturers recommend a 35-65% weight split as it makes it easier to control power hop. A 4 Wheel Drive tractor should weigh 85-125 pounds per engine horsepower. A general recommendation is a 60-40% split, with 60% of the weight in the front.