Question: What is a Category 3 tractor?

What is a cat 2 tractor?

Category 0 Hitch For tractors with up to 20 horsepower. Category 1 Hitch For tractors with 20 to 50 horsepower. Category 2 Hitch For tractors with 50 to 90 horsepower.

What is considered a Category 1 tractor?

Category 1 is very, very common and typically you’re gonna see Category 1 on tractors under about 50 horsepower. … This is typically used on tractors between about 50 and 150 horsepower or so, although there are always gonna be some exceptions in those ranges.

What is a Category 3 tractor hitch?

Category 3 hitches are found on tractors of 80 hp to 225 hp and have top link pins that measure 1-1/4″ and lift arm pins of 1=7/16″. The spacing of the lift arms is about 38″. … Category 3 tractors are beyond what most homesteaders will have, but if you do be aware of the the difference between the cat.

What size are category 2 pins?

What are the 3-point hitch categories?

Category Tractor Power Lift arm pin diameter
Up to 20 HP 5⁄8 in (16 mm)
1 20-45 HP 7⁄8 in (22 mm)
2 40-100 HP 1 1⁄8 in (29 mm)
3 80-225 HP 1 7⁄16 in (37 mm)
IT IS IMPORTANT:  How many horsepower is a Ford Jubilee tractor?

What is a quick hitch for a tractor?

This tractor hitch lets you quickly and easily attach and release three-point implements without leaving your tractor seat. Designed for tractors up to 45 HP, this trailer hitch features four position draw pin adjustments.

Can you use a CAT 1 implement on a cat 2 tractor?

If you wanted to stay with your current cat 1 implements, probably should have bought a cat 1 tractor. As 56FordGuy said, you have to be careful using cat 1 implements behind a cat 2 tractor. They typically just are not built to take the stresses that a cat 2 tractor can put on them.

What is a Category 2 hitch?

A Category 2 hitch increases the top link pin diameter to 1 inch and the lift arm pins to 1 1/8 inch. The spacing between the arms increases to approximately 32 inches.

What is a 3 point quick hitch?

This 3-point quick hitch is used for the easy attachment and release of 3-point implements and equipment. The lift arm spacing on this category 1 tractor hitch is 27-1/4 in. The distance between the lift arms and the top link is adjustable and ranges from a minimum of 15 in. to a maximum of 18-1/4 in.

How much weight can a three-point hitch lift?

Category 1 3-point hitch for maximum implement versatility. Category 1 hitch allows quick hookup of 3-point hitch implements, especially when equipped with the iMatch™ Quick Hitch and/or iMatch AutoHitch™. The lift capacity of the 3-point hitch is 1356 pounds (615 kg) measured at 24 in. behind the hitch balls.

How does a three-point hitch work on a tractor?

The three-point hitch uses two lower connection points and one upper point which provides a rigid connection. Hydraulic cylinders operate on the lower arms to raise and lower the implement. An additional hydraulic arm may act on the upper arm to control the draft (depth) of tillage equipment.

IT IS IMPORTANT:  How can I get more horsepower out of my lawn mower?

Do all tractors have a 3 point hitch?

Not all tractor drawn farm implements require the use of a three-point hitch, but many of them do. … A diagram is included which shows all of the parts of a three-point hitch. It shows a drawbar fastened between the two arms, which is not commonly used, but can be.

How do you determine top link length?

Top link. How to determine the best overall working length for your hydraulic top link is to get the true mid stroke pin-pin distance. The best way to do this is to have your tractor hitched up to your box blade (as an example) have the implement level with the ground front-back and side-side.