To use, simply pour the fuel stabilizer into the gas tank and then run the engine for 2 minutes to circulate the stabilizer throughout the fuel system. After a couple of minutes, the stabilizer will be distributed through the fuel and the engine, and the fuel will remain fresh for up to 24 months.
How do you fuel a gas stabilizer?
STA-BIL® should be added at 1-ounce per 2.5 gallons of fuel for proper protection. Leave the large cap tight, and then squeeze the bottle slowly to fill the dispenser to the level you need. Next, pour STA-BIL® into the gas tank and replace the gas cap. Don’t worry, we wiped up the little bit that spilled.
How do you mix fuel stabilizers?
To find the proper mixing ratio for a specific brand, refer to the fuel stabilizer label. Some brands recommend adding 1 ounce of fuel stabilizer to 1 gallon of fresh gasoline, while others recommend adding 1 ounce of stabilizer to 2.5 gallons of fresh gasoline.
Do you put stabilizer in mixed gas?
A: Yes, STA-BIL® Fuel Stabilizer works equally well for both 2-cycle (gas and oil mixture) and 4-cycle engines. STA-BIL® brand can be used in engines with any number of cylinders (e.g. 1, 2, 4, 6 or 8 cylinders). ” I believe it does make my Honda-powered equipment start more easily.
Should I use fuel stabilizer in my lawn mower?
One of the easiest ways to maintain your snow blower or lawn mower engine for seasons to come is by using fuel stabilizer. Whether putting your lawn mower or snow blower away at the end of the season or letting some time pass between uses, curbing your fuel’s degradation is crucial.
What happens if you put too much fuel stabilizer?
Nothing will happen , but using the recommended amount for the amountof fuel your stabilizing. Then add a little more just for good measure, fuel contains ethanol and might last a month depending on were you live and is hell on gravity fed gas engines.
Can you add fuel stabilizer to old gas?
Everyone advises that you should add a stabilizer to gas as soon as you purchase gasoline. They are all adamant that no additive will restore old gasoline. The best you can hope for is that adding a stabilizer to old gas will stop any further degradation. … Gasoline is considered a petroleum distillate, as is kerosene.
Is it better to drain gas or use stabilizer?
If draining the tank becomes a yearly habit, there’s a good chance you’re shortening the lifespan of your lawn mower and other tools. There’s a much easier way to properly store your lawn equipment. To avoid damage, simply use a quality fuel stabilizer and fresh fuel before putting equipment away for the season.
Should you leave gas in your lawn mower over the winter?
Unused gas left in a mower over the winter can get stale, gumming up the carburetor and inviting rust. … Turn the mower off and allow the engine to cool, then siphon excess gas into a clean can. (You can put this gas in your car, provided it hasn’t been mixed with oil.)
How do you mix Stabil fuel stabilizer?
For STA-BIL® Storage, use one ounce (30mL) to 2½ gallons (9.5L) of gasoline, gas/oil mixtures, or ethanol blends. For STA-BIL 360° Protection, for storage and everyday ethanol treatment use one ounce (30mL) to 5 gallons (19 L) of gasoline, gas/oil mixtures, or ethanol blends.
When should I add fuel stabilizer?
Make sure you put the stabilizer in right before you add fuel so that it mixes in properly with the gasoline, he says. Also, moisture can get into the tank over time because gas tanks sweat, and moisture will cause the gasoline to break down even quicker, says Brannon from AAA.
Can you put gas treatment in a lawn mower?
Maintain Your Lawn Mower With a Gas Additive
One of the easiest ways to maintain your lawn mower for seasons to come is by using a good quality fuel treatment like STA-BIL®. It’s the official gas additive of all Briggs & Stratton® engines. Fuel begins to degrade in as little as 30 days.